Synology drive server download3/17/2024 ![]() ![]() You can now click the power button on the front of the NAS and you will hear a beep and the device will take around 2-3mins to initialise. Once this is done, connect the power brick into the rear of the NAS and then the mains power lead into the power brick and the wall socket.įinally, you need to connect the network LAN cable into the network port on the rear of the NAS and connect the other end to your router, modem or switch (in simple speak, the box your internet service provider have you or the box the other internet things are connected to. Then just slide each tray+drive back into the NAS. ![]() Then put the clips back, ensuring the 4 plugs are inserted into the holes on the drive. Once removed, you can slot the hard drive into the tray, with the connector facing out and the manufacturer label facing up. Then each tray has removable clips on either side. Once you have unboxed all the accessories, you need to remove the trays (all of them, or as many as you need for your hard drives). Physical Installation of the hard drives or SSD into the Synology NAS is very, very easy and is completely toolless (for Hard drives, SSD require you to use 4 screws for each that are in the accessories box). That is all you need for Part 1 of this guide.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |